SMART MAG  NON ROTATING STRING MAGNET


about-us

Features 

    • The SMART MAG™ Heavy Duty Non-Rotating String Magnet have solid and robust non rotating steel sleeves assembly and connected with non-rotating centralizers.
    • SMART MAG™ Heavy Duty Non-Rotating String Magnet can handle high temperature ratings as well as higher coercivity.
    • Magnet sleeve designed for large fluid bypass and give better cutting travel path to improve annular velocity.
    • Non rotating magnet sleeve and stabilizers along with rotating heavy-duty mandrel.
    • Large magnetic area will collect more ferrous material from wellbore.
    • Non rotating string magnet design with high performance alloy bearings compatible with high temperature and chemical applications.
    • Tool available with all API connections and upon request premium drill pipe connections also available.

Description

The SMART MAG™ Heavy Duty Non-Rotating String Magnet is a heavy-duty wellbore clean out tool suitable for all downhole conditions including HPHT and Extended Reach wells. Tool designed for the removal of ferrous material from well bore through rotation and reciprocation. Future wellbore operation cleans the wellbore and free from metal debrisis important. SMART MAG™ Heavy Duty Non-Rotating String Magnet can run separately or as part of a comprehensive wellbore clean-out assembly. SMART MAG™ Heavy Duty Non-Rotating String Magnet assembled with smart and focus magnet technology this will contribute strong permanent magnet, strong resistance to corrosion as well as oxidation. SMART MAG™ Heavy Duty Non-Rotating String Magnet designed with heavy duty magnet blocks and tapered non rotating centralizer for passing through joints without getting held up while vertical or rotational operations. Additional water course to allow to lift maximum cuttings to surface. The alloy bearings feature is very rigid for both axial and radial elements to allow extended rotation in harsh environments preventing tool and casing wear.

Tool Operations

The SMART MAG™ Heavy Duty Non-Rotating String Magnet usually run with pin down, it can be run alone or as part of a comprehensive wellbore clean-out or drilling/Milling BHA. For well bore clean out BHA advisable to run SMART MAG™ Heavy Duty Non-Rotating String Magnet above the brush or scraper. While drilling/milling or combined operation pick up the string frequently and keep reciprocate the string circulates the well clean and clear the cuttings debris from wellbore, this will increase the flow path. Deviated well recommend to reciprocating the string minimum one joint intermediately and maintain minimum 135-150 FT/Min Annular velocity.

Benefits

    • SMART MAG™ Heavy Duty Non-Rotating String Magnet can use it for milling and wellbore clean out operations
    • Temperature rating 400deg F (204 degree C)
    • Cleaning the tool at rig floor very easy and fast, very simple to maintenance at rig locations.
    • Strong and long magnet area avoid multiple runs, will save rig time and cost
    • Provision for drilling, milling, well bore cleaning applications

Plan and Delivery

    • SMART MAG™ Heavy Duty Non-Rotating String Magnet selection by casing/liner sizes, ID and drift dia from the technical data sheet. Always customer data to be cross checked and verified prior to load out.
    • While dispatch the tool inspection report and operation manual to be send along with the tool.
    • Prior to mobilization verify SMART MAG™ magnet area to be covered properly with SMART MAG SKIRT™ to avoid damages while transportation and handling.
    • Prior to load out the tool collect all the information about the operation

Maintanence and Handling

    • Good Maintenance will prolong the life of the tools each runs tools must disassembled and inspect as per SMART MAG™ Heavy Duty Non-Rotating String Magnet Service Manual.
    • After POOH from wellbore clean and remove the metal debris from the tool and lay out, cover the magnet area with SMART MAG SKIRT™. Install thread protectors and keep the tool in to tool cage, make sure magnet sleeve portion not to touch on the ground or any other object.

Application

    • Clean the Wellbore and free from ferrous metal debris
    • Drilling, Workover,side-tracking and abandonment operations
    • Accommodate the magnet with any bottom hole assembly